Verifying Replication At A Branch Office - 3Com VCX V7000 Maintenance Manual

Ip telephony solution
Hide thumbs Also See for VCX V7000:
Table of Contents

Advertisement

96
C
6: M
HAPTER
ANUALLY
Verifying
Replication at a
Branch Office
C
M
-M
ONFIGURING
ULTI
ASTER
h Enter Site ID of Region 2.
i
For the Master Definition Site enter the IP address of Region 2.
j
For the Master Site enter the IP address of Region 1.
k On each VCX Authentication and Directory server run
checkReplication to verify replication is normal.
l
Log in as cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./checkReplication
m Restart Tomcat on each region's Call serve. Log in as root and enter
these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S70tomcat start
n Restart the Authentication and Directory service on each region's
Authentication and Directory server. Log in to each server as root and
enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S20vcxdata start
Database replication between a branch office and the regional office
associated with the branch is started automatically when VCX software is
installed on the branch. This section describes how to verify that
replication is enabled.
For replication of branch databases, the host Regional data server of the
branch office is always the Master Definition Site.
Use the following procedure to verify the branch office replication with
the host Regional VCX Authentication and Directory server.
1 Login on the branch office for which you want to verify replication as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./checkReplication
The script starts to run.
The
Enter the VCX Site Identification i.e. Site Id:
2 Enter the site ID of the branch office you are logged into.
R
EPLICATION
appears.

Advertisement

Table of Contents
loading

Table of Contents