3Com VCX V7000 Maintenance Manual page 337

CLI Command
Descriptions
> conf cct row=4 index=1 trustedaddr=<IP address>
You can enter the
help
( ) to display a list of application commands. You can enter a
> help
command without a parameter to display a list of available parameters,
for example:
> show
AcctCfg
AcctLogFilters
AcctServer
AcctServerStats
AcctServiceStats
AdhocServer
AppCmd
AppId
AppMibs
AuthCfg
AuthLogFilters
AuthServer
AuthServerStats
AuthServiceStats
CcCfg
CcLogFilters
CcQosCfg
CcQosMonitoredEndpoints
CcStats
CcTrusted
LogCfg
SipCfg
SipLogFilters
The remote CLI application uses the following commands for
administering the Call Processor:
Table 21 Remote CLI Command Descriptions
Command Description
exit Quits the Remote CLI application.
shutdown Shuts down the Call Processor gracefully.
version Shows the software version of the Call Processor and the version of
the Distributed Message Routing (DMR) 3Com proprietary protocol.
CLI Command Descriptions
command at the remote CLI application prompt
337