Stopping The Call Processor - 3Com VCX V7000 Maintenance Manual

Stopping the Call
Processor
Restarting the Call
Processor
You can stop the Call Processor service using operating system
commands or by using EMS.
Using Operating System Commands
To stop the Call Processor service using operating system commands:
1 Log in into the server hosting the Call Processor service using the vcx
account.
2 Enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S80callp stop
Using EMS
To stop the Call Processor service from EMS:
1 From the Explorer tab, right-click the 3Com Call Processor service.
2 From the pop-up menu, select Maintenance, then select Hard
Shutdown.
A dialog box appears and displays the progress of the command. When
the command has been completed, the Working icon changes to a
Finished icon.
You can restart the Call Processor service using operating system
commands or using EMS. Restarting the Call Processor service stops and
restarts the Call Processor service but leaves the Call Processor monitor
running.
Using Operating System Commands
To restart the Call Processor service using operating system commands:
1 Log in into the server hosting the Call Processor service using the vcx
account.
2 Enter these commands:
cd /opt/3com/VCX/scripts/rc3.d
./S80callp restart
Managing the Call Processor Service 55