Sample VCX Reconfiguration Script (continued)
-------------------------- Configuring Hostname ---------------------------
Enter system hostname
--------------------- Configuring IP Interface 'eth0' ---------------------
IP Address
Network Subnet Mask
Default Gateway Address
--------------------- Configuring IP Interface 'eth1' ---------------------
Interface State
IP Address
Network Subnet Mask
Default Gateway Address
------------------------- Configuring DNS Servers -------------------------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server
Secondary DNS Server
Tertiary DNS Server
----------------------- Configuring DNS Search Path -----------------------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path : yourcompany.com
: test-three
In this sample script, the host name is being changed from test-one to
test-three.
: 10.230.64.40
: 255.255.255.0
: 10.230.64.254
In this sample script, the IP address of eth0 is being changed from
10.230.64.30 to 10.230.64. 40. Other parameters remain unchanged.
: enabled
: 10.230.64.41
: 255.255.255.0
: 10.230.64.254
In this sample script, the IP address of eth1 is being changed from
10.230.64.31 to 10.230.64. 41. Other parameters remain unchanged.
: 10.25.10.31
: 10.26.10.31
: 10.27.10.31
In this sample script, DNS server IP addresses remain unchanged.
In this sample script, the DNS search path remains unchanged.
Sample VCX Server Reconfiguration
107