Configuring Personal Speed Dial Numbers
You set up speed dialing through the Telephone User Interface using the Program
button. Refer to the chapter that describes the buttons and controls on your telephone
for the location of the available speed dial Access buttons.
To configure a speed dial number using the Program button and the Speed Dial menu:
1
Press the Spd Dials soft button, or Menu button and then the Select button.
The Spd Dials menu appears.
The Display Panel lists the first speed dial:
1:
If the speed dial is already configured, the Display Panels show the configured number,
for example:
1:
1001
To locate the speed dial number you want to configure, press the speed dial number (1
through 9) or use the up and down scroll buttons.
2
Press the Change button, then enter the number you want to associate with this speed
dial. Include all prefix numbers that you would normally dial, such as a 9 or 8 or 1 to
access an outside line, and, if necessary, the country code or area code.
3
To store the number, press Enter or the # button.
Make sure you write the name of the person whose number you have stored and the
corresponding Speed Dial Access button or feature code.
Alternately, you can configure personal speed dial numbers by following these steps:
4
Pick up the handset or press the Speaker button.
5
Enter *601* + <speed dial index number 1 - 9> + * + <extension>.
6
Press the # button to store the number.
Example: New Call button + *601*2*12345 + #
Editing Personal Speed Dial Numbers
You can change or delete any personal speed dial number that you previously
configured using the Telephone User Interface.
To change or delete a previously configured speed dial number:
1
Press the Spd Dials or Menu button, and then press the Select button.
The Display Panel shows the configured number, for example:
1: 1001
To locate the speed dial number you want to change or delete, press the speed dial
number (1 through 9) or use the up and down scroll buttons
46