Command Descriptions - 3Com VCX V7000 Maintenance Manual

330 A E: VCX C
PPENDIX
Command
Descriptions
OMMANDS
This guide describes how to maintain your VCX system. Most
maintenance operations require entering commands to perform a
particular task or to run a script.
The tables in this appendix describe all available VCX commands. Many of
these commands are used (and described) elsewhere in this guide to
perform maintenance tasks. In this case, the tables provide cross
references to the relevant topics.
Many commands have required or optional arguments. For these
commands, you can use the
Table 16 lists commands you can use to reconfigure or back up a VCX
configuration.
Table 16 VCX Configuration and Backup Commands
Command
vcx-reconfigure
vcx-config-network
vcx-config-services
--show
vcx-config-backup
vcx-config-restore
vcx-backup-query
Table 17 lists commands you can use for various installation and removal
tasks, or to switch between versions of installed VCX software.
argument to view command syntax.
--help
Description
Changes IP addresses or most other first-time setup
parameters (certain parameters cannot be reconfigured). See
Chapter 7.
Changes network settings. Typically invoked as part of the
vcx-reconfigure operation. However, you can use this
command to modify the time zone setting for a machine.
See Changing a Daylight Saving and Time Zone
Configuration.
Changes a service configuration. Typically invoked as part of
a higher level script. However, you can use this command
with the --show argument to return a multi-page display
that shows your VCX system configuration.
For VCX versions 7.1 and higher, backs up the current VCX
software and VCX operating system configuration. See
Backing Up a VCX Configuration.
For VCX versions 7.1 and higher, restores an archived VCX
software and VCX operating system configuration. See
Restoring a VCX Configuration.
For VCX versions 7.1 and higher, displays information about
the specified VCX configuration backup file. See
Backup File.
Examining a