3Com VCX V7000 Maintenance Manual page 39

Table 7 CDR Field Descriptions and Values (continued)
Tag Variable
b0 SESSIONSEQUENCEEND
b1 ACCTAUTHENTICATIONFAILURECNT
b3 CALLINGPARTYE164ADDRESS
b6 CALLINGPARTYIPADDRESS
b9 CALLEDPARTYE164ADDRESS
c2 CALLEDPARTYIPADDRESS
d8 INGRESSGATEKEEPERIPADDRESS
e4 CALLIDENTIFIER
e5 CALLTYPE
e6 CALLSTARTTIMEINGRESSGWACCESS
e8 CALLSTARTTIMEANSWERED
f0 CALLENDTIME
f2 CALLDURATIONCONNECTTODISCONN
f3 CODECTYPE
Description and Values
Indicates when a session sequence
ends.
For internal use only.
Account Auth Failure Count
An E.164 number from which the
call is placed to the access gateway.
Only the phone extension is
displayed.
Calling Party IP Address
An E.164 number of the called
destination. Only the phone
extension is displayed.
Called Party Phone Number
Call Processor IP Address
This is a globally unique call ID.
For internal use only.
Indicates the type of call placed.
1 – Phone to phone
2 – PC to phone
3 – Phone to PC
4 – Fax to fax
Date and time when the call
accessed the ingress gateway.
Date and time when the call is
answered. For example, receipt of
answer supervision until call
disconnect.
Date and time when the call
disconnects. This is typically the
time when the billing stops.
Call duration in seconds from
connect to disconnect.
Audio CODEC type used for the
call, such as G.729, G.711, or
G.723.
For internal use only.
Managing CDRs and Super CDRs
Example
N/A
1
304001
9843771d
333333
f2794398
10.10.10.10
N/A
1
20050414 19:54:07
20050407 20:37:31
20050414 19:54:07
2
N/A
39