Sony DVS-9000 User Manual page 589

Knob Parameter
5 Shape
Knob Parameter
1 Aspect
2 Angle
a) Set when Lock is on.
b) Set when Lock is off.
c) 1 (Circle): Circle
2 (Rectangle): Rectangle
3 (Star): Star
4 (Heart): Heart
To limit the direction in which modulation is applied
By pressing [Plus Only], turning it on, you can limit the direction in which
modulation is applied (the direction in which the image expands) to the plus
direction only.
To set the ripple center point
1
Press [Position], turning it on.
2
Set the following parameters, depending on the selected modulation mode.
• When Shape is selected
Knob Parameter
1 H
2 V
• When other than Shape is selected
Knob Parameter
1 H
2 V
To limit the ripple range
1
Press [Range], turning it on.
Parameter group [1/2]
Adjustment
Ripple shape
Parameter group [2/2]
Adjustment
Ripple aspect ratio
Ripple angle
Adjustment
Ripple center point in
horizontal direction
Ripple center point in vertical
direction
Adjustment
Ripple center point in
horizontal direction
Ripple center point in vertical
direction
Setting values
c)
1 to 4
Setting values
–100.00 to +100.00
–8.000 to +8.000
Setting values
–5.000 to +5.000
–3.000 to +3.000
Setting values
–8.000 to +8.000
–6.000 to +6.000
DME Special Effect Operations
589