Sony DVS-9000 User Manual page 898

• During macro editing, pressing a button for which a macro attachment is set
To disable macro attachment settings
Depending on the location of the button you want to disable, press the [MCRO
ATTCH ENBL] button, turning it off.
In this state, pressing a button for which a macro attachment is set does not
execute the macro.
Executing a macro assigned to a fader lever
1
2
Notes
• Unless you move the fader lever to the end position (completing the travel),
• When the preset color mix stroke mode is Normal (see "Settings Relating to
• During macro execution, it is not possible to execute another macro.
• Individual events stored in a macro are executed according to the settings in
• During macro execution, if you switch the control panel to macro editing
• During macro editing, even if you operate a fader lever with a macro
To disable a macro attachment setting
In the cross-point control block for the fader lever on which you want to disable
the macro, press the [MCRO ATTCH ENBL] button, turning it off.
In this state, operating a fader lever with a macro attachment set does not
execute the macro.
898
Macro Attachment Assigning
does not execute the macro.
In the cross-point control block for the fader lever on which you want to
execute the macro, press the [MCRO ATTCH ENBL] button, turning it on.
Move the fader lever from the start position to the end position.
When the fader lever passes the position at which the macro attachment is
set, the macro register is recalled, and the macro is executed.
it is not possible to execute the macro again.
Video Switching (Transition Menu)" in Chapter 20 (Volume 3)), the first
lever operation executes the macro, but the second lever operation does not.
setup. If you change the settings in setup, a saved macro may not have the
expected effect.
mode, the macro being executed stops.
attachment set, the macro is not executed.