Sony DVS-9000 User Manual page 801

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

The button you pressed lights yellow, and this completes saving. The

[STORESTATS] button lights amber, and the numeric display shows the

bank number followed by the number of the selected register.

To enter the number of the desired snapshot save destination

After step 2 above, press the [10 KEY] button in the memory recall section.

This switches the memory recall section to the numeric keypad input mode,

and after pressing the [STOR] button, lighting it yellow, you can enter the

desired register number from the numeric keypad. The number you entered

appears in the alphanumeric display.

To find an empty register, press the [ . ] button without entering a number, and

the number of an empty register appears in the alphanumeric display.

Confirm the displayed number by pressing the [ENTR] button. This saves the

data in the specified register.

To cancel a snapshot save operation

After saving a snapshot, to cancel the save, hold down the [STORE STATS]

button and press the [UNDO] button.

The light of [STORE STATS] button changes from amber to green.

With a simple type Flexi Pad control block, it is not possible to cancel saving

Adding attributes in the Multifunction Flexi Pad control block

Press the [EDIT ENBL] button.

The button indications in the memory recall section change as shown in the

following illustration.

To cancel adding attributes, press the [EDIT ENBL] button once more, or

press the [EXIT] button.

Snapshot Operations in the Multifunction Flexi Pad Control Block