Pattern Mix - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

When Flash Rate is set to 0.00, you cannot change the pattern. In this state,

adjusting H Size or V Size has no effect on the pattern.

For details of a pattern mix, see the next section.

For details of applying pattern modifiers, see "Setting Wipe Modifiers"

Pattern Mix

You can create a new pattern by combining two selected patterns (main and

It is not possible to apply a pattern mix to an independent key transition.

Types of pattern mix

There are four ways in which patterns can be combined in a pattern mix, as

Mix: The effect of the sub pattern is applied to the main pattern, modifying the

outline or nature of the main pattern.

Positive NAM (+Nam): Creates a pattern with an outline which contains all

points within the outlines of either of the main pattern and the sub pattern.

Negative NAM (–Nam): Creates a pattern with an outline which contains all

points within the outlines of both of the main pattern and the sub pattern.

Basic Procedure for Wipe Settings