Sony DVS-9000 User Manual page 612

Applying the Trail effect
1
2
3
4
Switching the priority between the current image and trail
superimposed
In the <Priority> group, select the method of superimposition.
Over: Current image is on top.
Under: Trail is on top.
Selecting the source to create a trail
In the <Trail Source> group, select the source to create a trail.
Notes
• "Rainbow," "Mix Color," and "Ext Video" are not supported on the MVE-
• "Mix Color"or "Ext Video" can only be applied to one of the background
• When executing combining four channels of DME images, "Mix Color" and
612
DME Special Effect Operations
In the DME menu, select VF5 'Light/Trail' and HF2 'Trail.'
The Trail menu appears.
Press [Trail], turning it on.
The Trail effect is enabled. You can adjust the parameters with the knobs.
Set the parameters.
Knob Parameter
1 Decay
2 Interval
3 Live
a) 0.00 is no trail. At 100.00, the trail does not disappear.
To erase the trail, press [Trail Eraser], turning it on.
8000A.
(see page 636), flex shadow (see page 548), trail, and wind (see page 619)
effects.
If you select "Mix Color" or "Ext Video" in one of these settings, a selection
of "Mix Color" or "Ext Video" in any of the other effects is disabled, and
"Flat Color" is selected in its place.
"Ext Video" in the flex shadow and background effects cannot be selected.
Adjustment
Degree to which the trail is left
Freeze interval
Proportion of the interval
between two successive freeze
images for which the video is
run
Setting values
a)
0.00 to 100.00
1 to 255 (frames)
0.00 to 100.00