Wind Settings - Sony DVS-9000 User Manual

Select one of the following in the <Combine Process> group.
Combine –> KF STRB: Add the Keyframe Strobe effect after the combine.
As parameters, the data for the channel with the lowest number among the
channels being combined is enabled.
KF STRB –> Combine: Add the Keyframe Strobe effect before the combine.
Parameters can be set independently for each channel.

Wind Settings

Notes
• The wind function is not supported on the MVE-8000A.
• When wind is turned on, any of the following effects that are on are turned
off.
– Trail
– Motion decay
– Keyframe strobe
Applying the wind effect
1
In the DME menu, select VF5 'Light/Trail' and HF5 'Wind.'
The Wind menu appears.
2
Press [Wind], turning it on.
This enables the wind, and you can now adjust the parameters with the
knobs.
3
Set the following parameters.
Knob
1
2
3
a) 0.00 represents no afterimage, and 100.00 represents no decay in the afterimage.
4
To erase the afterimages, press [Wind Eraser], turning it on.
Parameter Adjustment
Decay Amount of afterimage
displayed
Shift H Extension in the horizontal
direction
Shift V Extension in the vertical
direction
Setting values
a)
0.00 to 100.00
–100.00 to +100.00
–100.00 to +100.00
DME Special Effect Operations
619