Sony DVS-9000 User Manual page 635

To add color to the light source
1
In the Light 1 menu, press [Light Color Adjust].
The Light Color Adjust menu appears.
2
In the <Fill Blending Mode> group, select how the light and image should
be blended.
Mix: Light as if reflected from a mirror.
Multiply: Light as if reflected from a dull surface (diffuse reflection).
3
If you selected Mix, select the fill color in the <Fill Source> group.
Flat Color: A monochrome matte.
Hue Rotation: Color matte with a color that gradually varies.
4
According to the selection, set the following parameters.
• When you selected Flat Color
Knob
1
2
3
4
a) 100.00: The image beneath the light shines through.
• When you selected Hue Rotation
Knob
1
2
3
4
a) –12.00 is a 360-degree rotation every second in the counterclockwise direction. +12.00 is
a 360-degree rotation every second in the clockwise direction.
b) 100.00: The image beneath the light shines through.
Copying or swapping light source settings
You can copy or swap the setting from one light source (Light 1 to Light 3) to
another light source.
1
In the Spot Lighting menu, press [Copy/Swap].
The Copy/Swap menu appears.
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Brilliancy Brilliance of surface struck by light 0.00 to 100.00
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Speed Speed at which hue changes
Brilliancy Brilliance of surface struck by light 0.00 to 100.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
a)
Setting values
0.00 to 100.00
0.00 to 100.00
a)
–12.00 to +12.00
b)
DME Special Effect Operations
635