Sony DVS-9000 User Manual page 880

The event number reflects the position of the cursor in the macro register
listing.
d Remaining Memory
Shows the percentage of memory still available for recording events.
e Macro register listing
When a macro is stored in the register, this shows a list of the macro events.
Each macro event consists of the following components, which you can check
in the list.
• Contents: Identifies this as an Event statement, Continue statement, or event
number
• Symbol: Type of event (ASCII character string)
• Data: Event details in the form of parameters and data
For details of the event components, see "Macro File Editing Rules" (page
949).
The cursor shows the current event in the list, in reverse video. You can turn
knob 1 to scroll the list, but this does not change the cursor position. Depending
on the switcher status, the cursor color changes as follows.
• Yellow: in macro editing mode
• Gray: when the editing mode is exited by a control panel operation
• Blue: during macro execution
f ALL button
Selects all events in the macro register listing.
g Macro creation event list
Shows the event being created or executed in the control panel.
h Insert Before button
Inserts a created event immediately before the selected event in the macro
register listing.
i Insert After button
Inserts a created event immediately after the selected event in the macro
register listing.
j Delete button
Deletes the selected event in the macro register listing.
k Modify button
Replaces the selected event in the macro register listing with a created event.
880
Macro Editing Using Menus