Setting Independent Key Transition Wipe Modifiers - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Setting Independent Key Transition Wipe Modifiers

Available modifiers

You can use the following modifiers with an independent key transition wipe.

Note that the available modifiers may depend on the pattern you are using.

• Positioner

• Aspect ratio

• Pattern replication

Setting the wipe direction (Direction)

In the <Direction> group of the Key1 Wipe Adjust menu, make any of the

following selections.

Normal: regular direction

Normal/Reverse: alternate between regular and reverse for each transition

Reverse: reverse direction to normal

Softening the wipe pattern edge (Soft edge)

Setting the wipe position (Positioner)

There are two methods of setting the wipe position: using the device control

block, or in a menu.

Wipe Settings for Independent Key Transitions

In the Key1 Wipe Adjust menu, select [Pattern Select].

The Pattern Select menu appears.

Press the button for the desired pattern.

Press [Soft] in the Key1 Wipe Adjust menu, turning it on.

Set the following parameter.

Edge softness

Setting values

0.00 to 100.00