Sony DVS-9000 User Manual page 690

• When using a disk recorder with the VTR/disk recorder timeline, if you carry
• Some operating limitations apply when the video disk communications
690
Control of VTRs, Extended VTRs, and Disk Recorders
Playback
KF1
a) In keyframe 2, set variable speed only, and do not set the start point.
out the following sequence of operations, the system may freeze on the frame
of the start point.
1. Press the [RUN] button to play to a point close to the end of a file.
2. Stop playback.
3. Press the [RUN] button once more.
In such cases, first recall a different register, then carry out the following
sequence:
1. Recall the original register again.
2. Press the [REWIND] button.
3. Press the [RUN] button.
protocol is used. These are explained with reference to the following figure,
which illustrates creation of a timeline that plays from the video of file A to
the video of file B.
KF1
– Operation with no problems:
KF1 action setting
Start
– Black video or still image appears momentarily when play switches from
file A to file B:
KF1 action setting
Start
Variable Speed set
Cueup
Playback at set variable speed
a)
KF2
A B
KF2
Operating status of file
A
Playing
Operating status of file
A
Playing
Playing at variable speed Cueup
Cueup
KF3
KF2 action setting
Start
KF2 action setting
Cueup
Cueup