Color Corrector Functions; Input Video Processing Operations - Sony DVS-9000 User Manual

Color Corrector Functions

This section describes the color corrector functions.
For each of the following operations, it is possible to copy or swap data
between two color correctors (CCR1 and CCR2).

Input Video Processing Operations

Carry out the following corrections to a YUV signal before conversion to an
RGB signal.
• Overall gain adjustment of the video signal
• Gain adjustment of the Y signal
• Gain adjustment of the C signal
• Hue delay
• Black level adjustment
To apply input video processing effects, use the following procedure.
1
2
3
To return the parameters to their default settings
Press [Unity] in the <Input Process> group.
426

Color Corrector Functions

In the CCR menu, press VF1 'CCR1' and HF1 'Input Process.'
The Input Process menu appears.
In the <Input Process> group, press [Input Process], turning it on.
Adjust the following parameters.
Knob Parameter Adjustment
1 Video Gain Video signal gain
2 Y Gain Y signal gain
3 C Gain Chrominance signal gain
4 Hue Delay Hue delay
5 Black Level Black level
Setting values
–200.00 to +200.00
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
–116.90 to +116.90