Sony DVS-9000 User Manual page 595

Knob
1
2
3
4
5
Knob
1
2
3
4
5
To set the partition position
1
Press [Position], turning it on.
2
Set the following parameters.
Knob
1
2
Mirror settings
You can choose to reflect in the directions left to right, right to left, bottom to
top, top to bottom, or any combination of directions. You can also set the
position of the border between original and reflections.
To apply the Mirror effect
With the Mirror menu displayed, press [Left to Right], [Right to Left], [Top to
Bottom], or [Bottom to Top] to set the reflection method (multiple selections
possible).
Left to Right: Reflect left side on right.
Right to Left: Reflect right side on left.
Parameter group [1/2]
Parameter Adjustment
Transition H Degree of transition in horizontal
direction
Random H Degree of randomness in distance
moved by blocks in horizontal
direction
Skew H Degree of skew in horizontal direction 0.00 to 100.00
Width H Horizontal width of partition
Angle Angle of partition line
Parameter group [2/2]
Parameter Adjustment
Transition V Degree of transition in vertical
direction
Random V Degree of randomness in distance
moved by blocks in vertical direction
Skew V Degree of skew in vertical direction
Width V Vertical width of partition
Angle Angle of partition line
Parameter Adjustment
H Horizontal partition position
V Vertical partition position
Setting values
0.000 to 100.000
0.00 to 100.00
0.00 to 100.00
–8.000 to +8.000
Setting values
0.000 to 100.000
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
–8.000 to +8.000
Setting values
–5.000 to +5.000
–5.000 to +5.000
DME Special Effect Operations
595