5
6
7
To return to the state before saving the master timeline content
In the <Store> group, press [Undo].
772
Creating and Saving a Master Timeline
• If the operation is carried out, the region selected in step 3 is registered
on the master timeline, and the parameters are now valid.
Turn the knob to select the number of the effect register.
Knob
Parameter
3
Effect Reg
Repeat steps 3 to 5 as required to set all regions and register numbers to be
saved on the master timeline.
In the <Store> group, press [Store].
This saves the settings.
Adjustment
Effect register number
Setting values
1 to 399