Sony DVS-9000 User Manual page 322

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Relation to processed keys

When using the DME for a processed key, if you select a DME wipe, an

available DME is automatically allocated to the DME wipe. If all of the DME

channels are in use, then it is not possible to select a DME wipe.

If in a Setup menu a setting has been made for DME allocation, that Setup

menu setting takes precedence (see "Setting the assignments of DME channels

to use on the individual M/E banks" in Chapter 20 (Volume 3).

Number of DME wipes that can be used simultaneously on a

single M/E bank

DME wipes can be used in five places, including the four independent key

transitions.

When the DME dedicated interface is used, a maximum of two DME wipes can

be used simultaneously, and when the SDI interface is used, only one DME

wipe can be used at one time.

When combining the SDI interface with the dedicated interface, it may be

possible to use up to three wipes simultaneously.

For details, see "Interfacing With External Devices (Device Interface Menu)"

in Chapter 19 (Volume 3).