System Settings (System Config Menu); Selecting The System Operation Mode - Sony DVS-9000 User Manual

System Settings (System Config Menu)

Specify the overall system operation mode and the hierarchical relationship of
the devices.
To make the system settings, use the System >System Config menu.
To display the System Config menu
In the Engineering Setup menu, select VF1 'System' and HF2 'System
Config.'
Note
After changing any of the following settings, be sure to press [Execute] to save
the new values. If you want to cancel the setting changes without saving them,
press [Clear].

Selecting the System Operation Mode

In the <Operation Mode> group of the System >System Config menu, select
one of the following.
• Single Proc mode: The control panel controls a single switcher.
• Dual Simul mode: The control panel controls two switchers simultaneously.
Notes
• Single Simul mode is disabled for a DVS-9000 system.
• When operating an MVS-8000 system and a DVS-9000 system in Dual
• For an MVS-8000 system, SD systems and HD systems store different
Device hierarchical relationship setting
• Panel Assign: Specify the switcher controlled by a control panel.
• Switcher Assign: Specify the DME connected to a switcher.
978
System Settings (System Config Menu)
Simul mode, simultaneous operation may not be possible because of
differences between the systems in some functions.
numbers of frames in frame memory. When operating an SD system and an
HD system in Dual Simul mode, use the HD system (which stores fewer
frames) as the first system (the system whose switcher ID is 1).