Selecting a wipe pattern in the Flexi Pad control block
To select a pattern with a standard type Flexi Pad control block, use the
following procedure. (It is not possible to select a wipe pattern with a simple
type Flexi Pad control block.)
1
In the M/E-1 Flexi Pad control block, press the [WIPE] button.
This switches the Flexi Pad control block to wipe snapshot mode.
2
In the memory recall section, press the [PTN NO] button.
This switches the Flexi Pad control block to wipe pattern number recall
mode.
3
Use the buttons in the memory recall section to enter the pattern number
consisting of up to three digits, and press the [ENTR] button.
WIPE button
Numeric display
XPT HOLD
A B U
U
1 2 3 4
1
2
1
WIPE
3
DME
5
SNAP
SHOT
7
UNDO
Memory recall buttons
UNDO button
Flexi Pad control block (simple type)
2
4
6
8
Wipe Snapshots
299