Sony DVS-9000 User Manual page 582

To stop the waves
Press [Lock], turning it on.
With each press, the waves alternately stop and start moving again.
To select the waveform
Press [Form] and set the following parameters.
582
DME Special Effect Operations
Knob Parameter Adjustment
3 a) Vertical direction in which to offset
Offset V
wave phase and amount of
movement
4 b) Vertical direction and speed of
Speed V
waves
5 Slant Slant of waves
a) Set when Lock is on.
b) Set when Lock is off.
• When Size is selected
Knob Parameter Adjustment
1 Amp H Amplitude of waves
2 Freq H Frequency of waves
3 a) Direction in which to offset wave
Offset H
phase and amount of movement
4 b) Direction and speed of waves
Speed H
5 Slant Slant of waves
a) Set when Lock is on.
b) Set when Lock is off.
Amp
Parameter group [2/2]
Offset
Setting values
–16.00 to +16.00
–100.00 to +100.00
–8.000 to +8.000
Setting values
0.00 to 100.00
0.00 to 100.00
–16.00 to +16.00
–100.00 to +100.00
–8.00 to +8.00