Sony DVS-9000 User Manual page 683

Press the [SET STOP TC] button in the device control block (search
dial). The display in the numeric keypad control block shows "STOP
TC." Enter the desired timecode from the numeric keypad control block,
and press [ENTER].
• Using the [SET DUR] button of the device control block (search dial):
Press the [SET DUR] button in the device control block (search dial).
The display in the numeric keypad control block shows "DUR" and the
current setting. Enter the desired duration from the numeric keypad
control block, and press [ENTER].
For details of timecode entry, see "Setting the start point and stop point
with the [SET XX] buttons" (page 684).
• Setting with the Cueup & Play menu:
For details of settings in the Cueup & Play menu, see "Setting the start
point, stop point, and start delay time in a menu" (page 685).
9
To set a start delay time, press the [DELAY] button in the device control
block, and enter a value in the numeric keypad control block.
Alternatively, make the setting in the Device >DDR/VTR >Cueup & Play
menu.
If no setting is required, continue to step 10.
For details of settings in the Cueup & Play menu, see "Setting the start
point, stop point, and start delay time in a menu" (page 685).
10
Press the [STORE] button, turning it on, in the numeric keypad control
block.
11
Enter the number of the register in which to save the settings.
When overwriting the settings in the register recalled in step 3, continue to
step 12 without changing the displayed register number.
12
Press the [ENTER] button.
This saves the settings in the register.
Automatically cueing up and playing VTR/Extended VTR/disk
recorder
By recalling a register in which you have saved setting data for Cueup & Play,
you can control the VTR/Extended VTR/disk recorder automatically in the
same way as when automatically executing a keyframe effect.
1
In the numeric keypad control block, press the [EFF] button, turning it on.
Control of VTRs, Extended VTRs, and Disk Recorders
683