Sony DVS-9000 User Manual page 285

2
Press [Aspect], turning it on.
3
Set the following parameter
Knob
1
Setting the wipe pattern replication (Multi)
The same pattern can be repeated horizontally and vertically or both, up to 63
times. You can also change the orientation of alternate copies, or change the
position.
• The parameter H Multi determines the number of pattern replications
horizontally, and the parameter V Multi determines the number of pattern
replications vertically.
• The parameter Shift determines the manner of replication.
At a value of –100.00, the pattern of the adjacent odd-numbered column on
the left lines up with the central coordinate horizontally.
At a value of +100.00, the pattern of the adjacent odd-numbered column on
the right lines up with the central coordinate horizontally.
For an independent key transition wipe, you can use the "Invert Type"
parameter to select from the following four types of replication pattern.
1: All replications in the same orientation
2: Even-numbered rows staggered
3: Even-numbered columns and rows inverted
4: Even-numbered columns and rows inverted, and even-numbered rows
staggered
.
Parameter Adjustment
Aspect Aspect ratio
"Multi" off
1 2
Setting values
–100.00 to +100.00
"Multi" on
3 4
Basic Procedure for Wipe Settings
285