Setting The Delay - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

Setting the Delay

To set the delay (see "Time Settings" (page 707)), use the following procedure.

Time Settings

In addition to the above operation, the effect duration may also be changed

as a result of inserting or deleting keyframes. See "Time Settings" (page

Press the [EDIT ENBL] button, turning it on.

Press the [DELAY] button, turning it on.

The display in the numeric keypad control block shows "DELAY"

followed by the delay time (seconds:frames).

Using the numeric keypad in the numeric keypad control block, enter the

timecode value for the delay, as a maximum of four digits.

You can also use the [TRIM] button to enter a difference value. (See "To

enter a difference value" (page 736).)

Press the [ENTER] button to confirm the entry.

This changes the delay setting.