Menu Operations - Sony DVS-9000 User Manual

parameters, which can then be controlled
by the knobs.
h Knob parameter buttons
These show the parameters currently
controlled by the knobs and their values.
Pressing one of these buttons displays the
numeric keypad window (see page 127),
and you can then enter a new value for the
corresponding parameter with the numeric
keypad.
i Previous page button
This shows the page number of the
previously displayed menu screen. Press it
to go back to that page. When the indication
[Parent] appears, this displays the parent
directory.
j Keyframe status
This shows the keyframe status of the
reference region. Pressing this button
switches the menu screen as follows.
When a menu other than the Key Frame
menu is currently shown: The menu
screen switches to the Key Frame
menu.
When the Key Frame menu is currently
shown: The menu screen switches to
the menu that was on the screen
immediately before the Key Frame
menu.
In some parts of menus such as the File
menu, this functions as a "Region selection
area," for selecting the region to which
operations apply.
k Default recall button
This only appears in those menus for which
the default recall function is available. (See
"Menus allowing a return to default
settings" (page 122).)
Press this button, turning it on, then press a
VF button or knob parameter button to
return the settings to their default values, in
the following groupings.
120
Basic Menu Operations
• Function grouping: the functions within
an HF menu under the VF button
• Knob parameters (parameters currently
controlled by the knobs)
l b (previous) button and B (next)
button
The b button returns to the previous menu.
Press the B button to continue to the next
menu.

Menu Operations

The method of menu operation is basically
the same when using a mouse with an
external monitor, but with mouse clicks in
place of button presses. There is no
difference in the menu control block
operation described here.
However, since the monitor has no knobs
for adjusting the parameters in the menu
control block, for details of operations
corresponding to these knob operations, see
the section below, "Operation With a
Mouse" (page 127).
Selecting an item
1
Press the VF button (1 to 7) for the
desired group of items.
The HF button (1 to 7) indications
change to show the items within the
selected group.
2
Press the HF button for the desired
item.
The indications in the status area and
function button area change, and you
can now make various changes to the
selected item.