Executing A Utility In The Utility/Shotbox Control Block - Sony DVS-9000 User Manual

Executing a Utility in the Utility/Shotbox Control Block

Bank selection buttons
By default, the memory recall buttons in the utility/shotbox control block are
assigned to shotbox registers 1 to 96, in banks 1 to 4 (see page 834), but in the
setup menu, you can assign these to any 96 actions.
To execute an assigned action
When the action is to execute a shotbox register, follow the procedure in
"Shotbox Execution in the Utility/Shotbox Control Block" (page 834).
1
Press one of the bank selection buttons [BANK1] to [BANK4] to select a
bank.
• The bank selection button you pressed lights amber.
• For the selected bank, the memory recall buttons show the button
numbers and corresponding button states. If a button has been given a
name in the setup menu, this name appears.
Not lighted: buttons with nothing saved
Lit orange: buttons saving a utility command or menu shortcut
2
Press the memory recall button for which the action you want to execute
has been registered.
BANK
1 2
1
BANK
7 8
2
BANK
13 14
3
BANK
19 20
4
Memory recall buttons
Utility/shotbox control block
3 4 5
9 10 11
15 16 17
21 22 23
6
12
18
24
819
Utility Execution