Cover Assembly - Toshiba QOSMIO G10 Maintenance Manual

4.11 Cover assembly

4.11 Cover assembly
Removing the cover assembly
The following describes the procedure for removing the cover assembly (See Figure 4-21 to
4-24).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
• M2.5×4.0B
• M2.5×6.0B
• M2.5×8.0B
• M2.5×16.0B FLAT BIND screw
(6)
4-34
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
(4)
(6)
(4)
(4)
(16)
(6)
(16)
(16)
(16)
Figure 4-21 Removing the screws (back)
4 Replacement Procedures
(16)
(16)
(8)
(8)
(16)
(16)
(16)
(4)
QOSMIO G10 Maintenance Manual (960-497)
x3 ("4" in the figure)
x3 ("6" in the figure)
x4 ("8" in the figure)
x10 ("16" in the figure)
(8)
(8)
(16)