Toshiba QOSMIO G10 Maintenance Manual page 270

Hide thumbs Also See for QOSMIO G10:

Table of Contents

4 Replacement Procedures

Installing the LE board

The following describes the procedure for installing the LE board (See Figure 4-26).

1. Connect the bluetooth flat cable to the connector CN4400 on the LE board.

2. Connect the LE board flat cable to the connector CN9670 on the LE board.

3. Fitting the wireless communication switch to the lever, install the LE board to the

cover assembly and secure it with the following screws.

QOSMIO G10 Maintenance Manual (960-497)

FLAT BIND screw

4.12 Bluetooth / LE board

Chapters

Table of Contents