Toshiba QOSMIO G10 Maintenance Manual page 61

2.3 Power Supply Troubleshooting
DC IN icon
Lights green
Blinks orange
Doesn't light
*1 When the power supply controller detects a malfunction, the DC IN icon blinks
orange. It shows an error code.
When the icon is blinking, perform the following procedure.
1. Remove the battery pack and the AC adapter.
2. Re-attach the battery pack and the AC adapter.
If the icon is still blinking after the operation above, check the followings:
Check 1 If the DC IN icon blinks orange, go to Procedure 2.
Check 2 If the DC IN icon does not light, go to Procedure 3.
Check 3 If the battery icon does not light orange or green, go to Procedure 4.
NOTE: Use a supplied AC adapter G71C0002R610.
2-8
Table 2-2 DC IN icon
Power supply status
DC power is being supplied from the AC adapter.
Power supply malfunction
Any condition other than those above.
QOSMIO G10 Maintenance Manual (960-497)
2 Troubleshooting Procedures
*1