Keyboard - Toshiba QOSMIO G10 Maintenance Manual

4.7 Keyboard

4.7 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-9 to 4-11).
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Open the display.
2. Insert your finger into the slot between the keyboard brace and the computer. Then,
lift up the keyboard brace to unlatch and remove it.
3. Remove the following screw securing the speaker cover assembly
• M2.5×4.0B
4. Slide the speaker cover assembly to the arrow direction and pull up to remove.
Speaker cover assembly
4-20
FLAT BIND screw
Figure 4-9 Removing the speaker cover assembly
4 Replacement Procedures
x1
Keyboard brace
M2.5x4.0B FLAT BIND
QOSMIO G10 Maintenance Manual (960-497)