Toshiba QOSMIO G10 Maintenance Manual page 254

4 Replacement Procedures
Installing the switch membrane
The following describes the procedure for installing the switch membrane (See Figure 4-12).
1. Slide and set the switch membrane in the computer.
2. Turning up the insulator, connect the switch membrane to the connector CN9650 on
the system board.
3. Secure the switch membrane with the following screw.
•
QOSMIO G10 Maintenance Manual (960-497)
M2.5×2.8B FLAT BIND screw
4.8 Switch membrane
x1
4-25