Le Board - Toshiba QOSMIO G10 Maintenance Manual

4.12 Bluetooth / LE board

4.12.2 LE board

Removing the LE board
The following describes the procedure for removing the LE board (See Figure 4-26).
1. Remove the following screws securing the LE board and remove the LE board from
the cover assembly.
• M2.5×4.0B
2. Disconnect the LE board flat cable from the connector CN9670 on the LE board.
3. Disconnect the bluetooth flat cable from the connector CN4400 on the LE board.
M2.5x4.0B FLAT BIND
LE board
Switch
4-40
FLAT BIND screw
Figure 4-26 Removing the LE board
4 Replacement Procedures
x2
bluetooth flat cable
LE board flat cable
QOSMIO G10 Maintenance Manual (960-497)
CN4400
CN9670