Toshiba QOSMIO G10 Maintenance Manual page 308

4 Replacement Procedures
Installing the LCD harness
The following describes the procedure for installing the LCD harness (See Figure 4-56).
1. Arrange the LCD harness along the guide.
2. Install the LCD harness holder (display cover side) and secure it with the following
screw.
• M2.5×4.0B
3. Install the LCD support (display cover side) and secure it with the following screws.
• M2.5×6.0
4. Install the LCD cushion on the LCD support.
NOTE: When installing the LCD cushion, make sure that the edge of LCD cushion is fit
on the edge of LCD support.
QOSMIO G10 Maintenance Manual (960-497)
FLAT BIND screw
PSP TIGHT screw
Fit the edges
4.28 LCD harness
x1
x2
4-79