Toshiba QOSMIO G10 Maintenance Manual page 223

3.31 SETUP
(b) Hard Disk Mode
Use this option to select the hard disk mode.
Enhanced IDE (normal)
Standard IDE
NOTE: Formats for Enhanced IDE and Standard IDE are different, so if you change the
setting, you will have to reformat the hard disk for the appropriate setting.
12. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled
Disabled
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
When a computer is FDD built-in model, this option is not displayed.
Enabled
Disabled
13. PCI LAN
This option sets the Enable / Disable of the built-in LAN functions.
Enabled
Disabled
3-102
Select this mode when the HDD is used for MS-DOS,
Windows 95/98/2000/XP, or OS/2.
Select this mode when using an OS which does not
support the Enhanced IDE. When this mode is selected,
up to 528MB is logically available and the rest of the
capacity is not usable.
Enables support. (Default)
LEGACY
USB keyboard/USB mouse are available without the driver.
Disables LEGACY support
Enables support. (Default)
LEGACY
USB floppy disk is available without the driver.
Disables LEGACY support
Enables built-in LAN functions. (Default)
Disables built-in LAN functions.
3 Tests and Diagnostics
QOSMIO G10 Maintenance Manual (960-497)
(Default)