Toshiba QOSMIO G10 Maintenance Manual page 259

4.10 Display assembly
7. Peel off the mask seals from the display mask and remove the following screws
securing the display mask.
• M2.5×6.0B
8. Releasing latches of hinge caps, remove the hinge caps from both sides.
9. Remove the following screws securing the hinge.
• M2.5×8.0B
Hinge cap
M2.5x8.0B FLATBIND
(Locktight)
Mask seal
M2.5x6.0B
FLAT BIND
4-30
FLAT BIND screw
FLAT BIND screw
(Locktight)
Hinge cap
Figure 4-18 Removing the hinge caps
4 Replacement Procedures
x2
x2
M2.5x8.0B FLATBIND
(Locktight)
Mask seal
M2.5x6.0B
FLAT BIND
QOSMIO G10 Maintenance Manual (960-497)