Lcd Unit / Fl Inverter - Toshiba QOSMIO G10 Maintenance Manual

4 Replacement Procedures

4.27 LCD unit / FL inverter

CAUTION: When replacing a LCD, it is required that SVP parameter is set. Update with
the latest EC/KBC as described in Appendix H "EC/KBC Rewrite
Procedures".
Removing the LCD unit / FL inverter
The following describes the procedure for removing the LCD unit and FL inverter (See
Figure 4-52 to 4-55).
1. Insert your finger between the edge of the display mask and the LCD, and remove the
display mask while releasing the latches of display mask.
QOSMIO G10 Maintenance Manual (960-497)
Figure 4-52 Removing the display mask
4.27 LCD unit / FL inverter
Display mask
4-73