Toshiba QOSMIO G10 Maintenance Manual page 286

Hide thumbs Also See for QOSMIO G10:

Table of Contents

4 Replacement Procedures

Installing the speaker (R)

The following describes the procedure for installing the speaker (R) (See Figure 4-37 to 4-

1. Install the speaker (R) to the slot of base assembly.

2. Arrange the speaker (R) cable along the guide and connect it to the connector

CN6003 on the system board.

NOTE: Be sure to arrange the speaker (R) cable in the following guide.

QOSMIO G10 Maintenance Manual (960-497)

4.19 Speaker (R) / TJ board

Chapters

Table of Contents