4.19 Speaker (R) / TJ board
Installing the TJ board
The following describes the procedure for installing the TJ board (See Figure 4-40).
1. Install the TJ board and secure it with the following screws.
• M2.5×4.0B
2. Arranging the TV antenna cable along the guide, connect it to the connector
CN9611 on the TJ board.
NOTE: Be sure to arrange the TV antenna cable in the following guide.
4-60
FLAT BIND screw
= Guide
QOSMIO G10 Maintenance Manual (960-497)
4 Replacement Procedures
x2