Toshiba QOSMIO G10 Maintenance Manual page 311

Hide thumbs Also See for QOSMIO G10:

Table of Contents

4.29 Wireless antennas

Installing the wireless antennas

The following describes the procedure for installing the wireless antennas (See Figure

4-57 and 4-58).

1. Stick the wireless LAN antennas and bluetooth antenna on the display cover.

NOTE: When sticking the wireless antennas, be sure to stick them along the guide line.

2. Arrange the wireless LAN antenna cables and bluetooth antenna cable along the

guide of display cover, and secure them with acetate tapes.

3. Install the hinge (display cover side) to the display cover and secure them with the

following screws.

PSP TIGHT screw

QOSMIO G10 Maintenance Manual (960-497)

4 Replacement Procedures

Chapters

Table of Contents