Chapter 4 Replacement Procedures
4.9 Top Cover Assembly
Removing the top cover assembly
The following describes the procedure for removing the top cover assembly (See Figure 4-9-
1 to 4-9-4).
1. Turn over the computer.
2. Remove the following screws securing the cover assembly from the back and bottom
of computer.
M2.02F
M2.03F
M2.04F
M2.06F
M2.58F
3. Disassemble KB Holder and KB (See Figure 4-5-1 to Figure 4-5-2)
Satellite T110 / Satellite Pro T110 / PORTEGE T110Maintenance Manual (960-Q08)
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
FLAT BIND screw
Figure 4-9-1 Remove the screws (back)
x3
x2
x9
x3
x2
31