Toshiba QOSMIO G10 Maintenance Manual page 296

4 Replacement Procedures
NOTE: Apply the silicon grease enough to cover the chip surface using the special
applicator.
5. Install the CPU heat sink and heat sink holder and secure them with the following
screws.
• M2.0×4.0Z
NOTE: When securing the heat sink holder, be sure to secure the screws in the order of
the number marked on the holder.
QOSMIO G10 Maintenance Manual (960-497)
Figure 4-46 Applying silicon grease
BIND screw x3
4.23 CPU
4-67