Srx5800 Services Gateway Standard-Capacity Ac Power Supply; Table 19: High-Capacity Ac Power Supply Leds - Juniper SRX5800 Hardware Manual

Table 19: High-Capacity AC Power Supply LEDs

Label Color State
Green Off
AC-1 OK
On
Green Off
AC-2 OK
On
Green Off
DC OK
On
PS FAIL Red Off
On
Related
Documentation

SRX5800 Services Gateway Standard-Capacity AC Power Supply

Copyright © 2015, Juniper Networks, Inc.
Description
AC power applied to power supply at the upper appliance inlet is not within the
normal operating range.
AC power applied to power supply at the upper appliance inlet is within the normal
operating range.
AC power applied to power supply at the lower appliance inlet is not within the
normal operating range.
AC power applied to power supply at the lower appliance inlet is within the normal
operating range.
DC power outputs generated by the power supply are not within the normal
operating ranges.
DC power outputs generated by the power supply are within the normal operating
ranges.
Power supply is functioning normally.
Power supply is not functioning normally. Check the
LEDs for more information.
SRX5800 Services Gateway Craft Interface Power Supply LEDs on page 27
SRX5800 Services Gateway High-Capacity AC Power Supply on page 90
SRX5800 Services Gateway Power System Overview on page 87
Each standard-capacity AC power supply has a corresponding AC appliance inlet located
in the chassis directly above the power supply. Each inlet requires a dedicated AC power
feed and a dedicated 15 A (250 VAC) circuit breaker. See
WARNING: To meet safety and electromagnetic interference (EMI)
requirements and to ensure proper operation, the services gateway chassis
must be adequately grounded before power is connected. See
the SRX5800 Services Gateway" on page 220
Chapter 6: Power System Description
, , and
AC-1 OK AC-2 OK DC OK
Figure 63 on page 94.
"Grounding
for instructions.
93