Power System Description; Srx5800 Services Gateway Power System Overview; Table 16: Power Supply Type Summary - Juniper SRX5800 Hardware Manual

CHAPTER 6

Power System Description

SRX5800 Services Gateway Power System Overview

Table 16: Power Supply Type Summary

Power Supply Type
AC standard-capacity
AC high-capacity
DC standard-capacity
DC high-capacity
High-capacity DC
Copyright © 2015, Juniper Networks, Inc.
SRX5800 Services Gateway Power System Overview on page 87
SRX5800 Services Gateway High-Capacity AC Power Supply on page 90
SRX5800 Services Gateway High-Capacity AC Power Supply LEDs on page 92
SRX5800 Services Gateway Standard-Capacity AC Power Supply on page 93
SRX5800 Services Gateway Standard-Capacity AC Power Supply LEDs on page 94
SRX5800 Services Gateway High-Capacity DC Power Supply on page 95
SRX5800 Services Gateway High-Capacity DC Power Supply LEDs on page 97
SRX5800 Services Gateway Standard-Capacity DC Power Supply on page 98
SRX5800 Services Gateway Standard-Capacity DC Power Supply LEDs on page 99
The SRX5800 Services Gateway uses either AC or DC power supplies. The services
gateway is configurable with two to four AC power supplies or two or four DC power
supplies. The power supplies connect to the midplane, which distributes the different
output voltages produced by the power supplies to the services gateway components,
depending on their voltage requirements.
Table 16 on page 87 describes the different types of power supplies available.
Input Condition (If Any)
One AC input
Two AC inputs
One DC input
Two DC inputs
Maximum Output Redundancy
1700 W 3+1
1700 W 2+2
4100 W
1700 W
1700 W
4100 W
Power
Distribution
Shared
Zoned
87