SRX5800 Services Gateway Hardware Guide
Related
Documentation
32
Table 11 on page 32
shows the electrical specifications for the alarm relay contacts.
Table 11: Alarm Relay Contact Electrical Specifications
Maximum Voltage
Maximum Current
Figure 17 on page 32
shows an example wiring diagram for a simple alarm reporting
device. In this case the device is a 12-volt light bulb that illuminates when the device
encounters a condition that activates the major alarm LED and relay contacts. The alarm
relay contacts can also be used to activate other devices such as bells or buzzers.
Figure 17: Example Alarm Reporting Device
SRX5800 Services Gateway Craft Interface Overview on page 24
SRX5800 Services Gateway Craft Interface Online Buttons on page 28
Connecting an SRX5800 Services Gateway to an External Alarm-Reporting Device on
page 226
Alarm Relay Contact Wire Specifications for the SRX5800 Services Gateway on page 144
Current Type
AC
DC
250
30
8 A
Copyright © 2015, Juniper Networks, Inc.