Mic With 1X100Ge Cfp Interface (Srx-Mic-1X100G-Cfp); Figure 31: Srx-Mic-10Xg-Sfpp Serial Number Label; Figure 32: Srx-Mic-1X100G-Cfp - Juniper SRX5800 Hardware Manual

Services gateway
Hide thumbs Also See for SRX5800:
Table of Contents

Advertisement

Serial number location
Related
Documentation

MIC with 1x100GE CFP Interface (SRX-MIC-1X100G-CFP)

Description
Copyright © 2015, Juniper Networks, Inc.
The serial number label is yellow and located as shown in

Figure 31: SRX-MIC-10XG-SFPP Serial Number Label

Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 35
Modular Port Concentrator (SRX5K-MPC) Specifications on page 48
You use MICs and MPCs to add different combinations of Ethernet interfaces to your
services gateway to suit the specific needs of your network. The SRX-MIC-1X100G-CFP
(see
Figure 32 on page
55) can be installed in an MPC to add one 100-Gigabit Ethernet
CFP port.

Figure 32: SRX-MIC-1X100G-CFP

MIC with one CFP 100-Gigabit Ethernet port
Fits into MPC
Supports up to 100 Gbps of full-duplex traffic
Maximum configurable MTU: 9192 bytes
Maximum throughput: 100 Gbps
Chapter 4: Line Card and Module Description
Figure 31 on page
55.
55

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents