SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
6. Optical section
(1) Optical unit
1
Remove the upper cabinet.
2
Remove two connectors from the optical unit and remove the
optical unit. (Refer to the A-1.)
7. Drive section
(1) Main charger electrodes
Screw
Optical unit
Connector
Screw
Cables
Screw
12 – 21
1
Remove the right cabinet, the rear cabinet, and the upper cabinet.
(Refer to the A-1/2/3.)
2
Remove the cables of the grid bias electrode, the main charger
electrode, and the GND electrode.
3
Remove the drive section cover.
Grid bias
electrode
Main charger
electrode
4
Remove the grid bias electrode, the main charger electrode, and
the GND electrode.
Drive section cover
GND electrode