Sharp JX-8200 Service Manual page 137

SHARP SERVICE MANUAL JX8200SM [12] DISASSEMBLY AND ASSEMBLY
5
Remove the transfer unit lower arm R and L, and lift and hold the
transfer unit.
Put the transfer unit lower arm R onto the transfer unit frame
(transfer drum bearing section.)
Transfer drum frame
(Transfer drum
bearing section)
Note: When lifting and holding the transfer unit, be careful not to
drop it. If dropped, it is very dangerous. Use enough care.
6
Remove the front lower cabinet with care not to break the pawl.
Transfer unit
lower arm L
Transfer unit
lower arm R
7
Remove the paper feed unit.
Transfer unit
lower arm L
(2) Paper cassette size sensor PWB
1
Remove the power supply unit. (Refer to the B-1.)
2
Remove the paper cassette size sensor PWB.
12 – 5
Front lower arm
Paper feed unit
Paper cassette
size sensor PWB